LRC GAS Radio controlled overfill prevention systems
LRC GAS Radio controlled overfill prevention systems
Product overview
LRC Small LPG
LRC Small Remote
LRC Charger
LRC REC2
The LRC LPG system controls automatically the LPG tank level limit. When the permissible filling quantity is reached, the filling is automatically stopped by the contact of the liquefied gas at the limit probe. If required, the tanker driver can immediately interrupt or stop the filling process or control the speed by using the additional hand-held transmitter or directly on the LRC-Small Remote Control. The filling can also be interrupted/restarted directly on the LRC-Small transmitter. In countries where a limit probe is not mandatory in the tank and does not exist, the radio controlled overfill prevention is controlled by the EX radio remote control LRC-Small / Remote. A dead man (dead man time set by the manufacturer) is activated and the driver presses the STOP button as soon as the tank is full to close the valve on the tanker and finish the filling.
The following functions can be performed with the LRC-Small handheld transmitter or with the additional remote control:
- Engine start / stop
- Filling start / stop
- Rotational speed control
- Loading process interruption
- Wind and rewind hose drum
- Dead man function
- ANA function (Germany)
- Automatic fill stop
APPLICATION AREAS:
- LPG tank facilities
- Loading/Unloading of chemical products
- Ship refueling
- Refueling of LPG tank trucks
- Filling of stationary tanks
ADVANTAGES LRC GAS:
- 100% overfill prevention
- All remote control functions integrated in a single system
- Limit probe -function test
- No use of cables
- Fast unloading increases the efficiency of tankers
- Better utilization of the tanker vehicles, since effective time is saved for each unloading process
- Easier handling and comfort for the driver
CERTIFICATES:
- ATEX certificate: TÜV-A Ex-00.ATEX.0001X, Classification LRC-Small / Gas and LRC-Small / Batt: II2 (1) G EEx ib [ia] IIB T4
- CE conformity: compliant with EN 55011/1998, EN50082-2, directive 95/54 / EC
- Radio module: compliant with EN 300 220-1, tested by Senton Germany
FURTHER COMPONENT IDENTIFICATIONS:
- VdTÜV component code TÜ-AGG 340-01
- VdTÜV component code ÜS1.06-50 LPG
- EU-prescribed EEC type-approval for automotive electronics: e12 02 0094
Application field/ Pictures of LRC GAS
LRC ADN SHIP
LRC ADN SHIP product overview:
LRC SMALL
LRC CHARGER
LRC SMALL REMOTE
EX BATTERY CASE
CONNECTION CABLE TO PUMP OR FLOATER-PLUG (10h NOSE)
LRC REC2
*European Convention for the Transport of Dangerous Goods by Inland Waterways ADN Regulation 7.2..2.21 Safety and Inspection Equipment Loading and unloading of Class 2 substances and of Classes UN 1280 and 2983 substances shall be carried out at two points on the vessel (front and back) and in two places on land (directly at the entrance to the ship and a sufficient distance on land) can be interrupted by switches the load / unload operation. The loading / unloading process must be interrupted by a quick-acting valve located directly on the mobile connecting line between the ship and the shore. The interruption system must operate on the quiescent current principle.
*Accord européen relatif au transport international des marchandises dangereuses par voie de navigation intérieure
APPLICATION AREAS:
- Radio controlled overfill prevention system for loading and unloading tanker ships according to ADN standard.
LRC radio controlled overfill prevention
LRC radio controlled overfill prevention product overview
LRC-SMALL
LRCSMALL REMOTE
LRC RC2
LRC CHARGER
LRC REC2
LRC OP4
LRC-Small is a complete radio controlled overfill prevention system. It is designed for the filling of stationary and mobile tanks (e.g. tank trucks).
The following functions can be carried out with LRC Small:
- Motor (pump) start / stop
- Filling start / stop
- Rotational speed control
- Filling process interruption
- Wind / rewind hose drum
- Dead man's function
- ANA function (Germany)
- Automatic fill stop
The following types of limiters can be addressed:
- Limit value transmitter according to TRbF (PTC thermistor probes - German standard EN13616)
- Float probes (nose on 10h)
- Optical limit switches (Swiss standard, ship standard BeNeLux)
- Probes with relay contact
Overfilling is reliably prevented in combination with limit probes. The devices are approved for use in both potentially explosive and non-hazardous areas.
Applications LRC Small:
- Discharge of all liquid products and powdery / granular substances from the tanker / container to the tank
- Loading of tanker / container at the depot and terminal wagon refueling / wagon unloading
- Ship, boat, aircraft and helicopter refueling
- Industrial applications for radio remote control of all kinds in hazardous areas.
APPLICATION AREAS:
- Mineral oil products (EX and not EX)
- Chemical products
- LPG, technical gases
- Ship refueling
- Loading/Unloading of trucks
- Filling of stationary tanks, and much more
ADVANTAGES LRC SMALL RADIO CONTROLLED OVERFILL PREVENTION:
- Overfill prevention without compromise
- No use of cables
- Optimized loading/unloading processes
- Simplified work processes
- Time and cost savings
- Safety and productivity increase
- Environmental protection
- Suitable for any product
- "Fail Safe" and "Fail to Safe System"
Application field/ Pictures of LRC
LCR3 Radio controlled overfill prevention systems
LCR3 Radio controlled overfill prevention systems product overview:
LRC3 CONTROL
LRC3-SMALL
LRC3-RC
LRC3 PROGRAMMING DEVICE
LRC3 CHARGING DEVICE
LRC3 ANTENNA ROD (ROOF ANTENNA)
LRC OP1
LRC 3, is a radio controlled overfill prevention system with integrated cable solution. It is designed for the loading process of stationary and mobile tanks (e.g. tank trucks) in the non-EX area.
Following functions can be performed with LRC 3:
- Motor (pump) start / stop
- Filling start / stop
- Rotational speed control
- Loading process interruption
- Wind / rewind hose drum
- Switch the auxiliary shaft to / and off
- Additional freely definable remote control functions
- Deadman operation and emergency stop
- ANA function (Germany)-deadman
- Automatic fill stop
- For further activations of the tank truck management system from the tank with the remote control LRC 3 Remote are possible in conjunction with TWM from Horn Tecalemit - see https://www.tecalemit.de/; SAM Meter or Dezidata Meter.
The following types of limiters can be addressed:
- Limit value transmitter according to TRbF (PTC thermistor probes - German standard EN13616 )
Overfill is reliably prevented in combination with limit probes.
APPLICATION AREAS:
- Mineraloil products not EX
- Heating Oil products
- Chemical products not EX
- Foods Industry
- Loading/unloading of road tankers
- Filling of stationary tanks and much more
Advantages of LRC 3
- Overfill prevention
- Radio and cable -combined system
- Additional Remote Control unit with display information
- Several switching outputs
- CAN bus output
- Remote Control incl. deadman
- Extra light weight housing
- Lightweight, replaceable Lilo battery
- Price-performance benefits
- Simple and space-saving design installation
- Slim design
- Improved handling
- Optimized loading / unloading processes
- Simplified work processes Time and cost savings
- Safety and productivity increase
- Environmental Protection
- "Fail Safe" and "Fail to Safe System"
Application Examples and References
Subcategories
LRC3 Funk- Ab- und Überfüllsicherung
Beschreibung
LRC Überfüllsicherung
LRC GAS
LRC ADN SHIP
LRC SCHIFFBUNKERN
LRC-ADP/Opto
Stationäre Überfüllsicherungen
Product Overview
- Tankmonitoring
- SECU TANK
- Battery powered Level Gauging
Product Information SECU TANK
- pdf Product Information SECU Tank ONE E
- pdf Product Information SECU Tank DATA GSM E
- pdf Product Information SECU Tank Relay E
- pdf Product Information SECU Tank QUATTRO GSM E
- pdf Product Information SECU TANK NET E
